background image

43

Printing Photographs Directly from a Compliant Device

Printing Photographs Directly from a 

Compliant Device

Printing from a PictBridge Compliant Device

You can connect a PictBridge compliant device such as a digital camera, camcorder, or mobile 
phone and print recorded images directly without using a computer.

A device with this mark is PictBridge-compatible.

„

Connecting a PictBridge Compliant Device

To connect a PictBridge compliant device to this machine, use a USB cable recommended by 
the device’s manufacturer.

1

Set up the machine.

Refer to the 

Easy Setup Instructions

 to set up the machine and make it ready for printing.

2

Turn on the machine and load the paper in the machine.

See “Turning the Machine On and Off” on page 4 and “Loading Printing Paper” on page 8.

Note

z

PictBridge is an industry standard enabling a range of digital photo solutions, including the direct 

printing of photos from a digital still camera, camcorder or mobile phone* without the need to use a 

computer. A device can be connected to this machine for direct printing regardless of the manufacturer 

or the model as long as it complies with the PictBridge standard.

z

You can select the images to print and specify various print settings from your camera or mobile phone.
* PictBridge compatible digital still cameras, digital camcorders, and camera-equipped mobile phones 

are hereafter collectively referred to as “PictBridge compliant device”.

Caution

Do not connect any equipment other than PictBridge compliant devices or optional Bluetooth Units 

BU-20 to the Direct Print Port of the machine. If you do so, electric shock, fire, or damage to the 

device could result.

Note

When printing photos with the digital device connected to the machine, we recommend the use of 

the AC adapter supplied with the device. If you are using the device battery, be sure to charge it 

fully.

Note

The Print Head cannot be aligned using the controls of the PictBridge compliant device. If Print 

Head alignment is not yet performed and the MP Drivers are not installed in the computer, be sure 

to align the Print Head. See “Aligning the Print Head” on page 64.

Содержание 1454B002





















































































































Отзывы: