background image

EdgeAccess 

Appendix A 

Warranty 

Limited Lifetime Warranty 

Effective July 1, 2005 and After

,

 

Canoga Perkins warrants that, at the time of sale, and, for its lifetime, 

with certain exceptions noted below, every Canoga Perkins' labeled product purchased will be free from 
defects in material and workmanship for its lifetime, if properly installed and used in conformity to Canoga 
Perkins' published specifications.  This warranty covers the original user only and is not transferable.  For 
the purposes of this Warranty, "lifetime" is defined as the serviceable life of the product (a minimum of 5 
years) or any longer period during which replacement spare parts are available.  Subject to the conditions 
and limitations set forth below, Canoga Perkins will, at its option, either repair or replace any part of its 
product(s) that prove defective by reason of improper workmanship or materials. The warranty period for 
power supplies, fans and optics is five (5) years.  Consumables such as filters are covered for one year. 
Software is warranted for 90 days. Hardened Media Converter (HS) products are covered for three (3) 
years.  

This warranty does not cover any damage to products that have been subjected to lightning or other Acts of 
Nature, misuse, neglect, accident, damage, improper installation, or maintenance, including over-voltage 
failures caused by use outside of the product's specified rating, normal wear and tear of mechanical 
components, or alteration or repair by anyone other than Canoga Perkins or its authorized representative. If 
the user is unsure about the proper means of installing or using the equipment, contact Canoga Perkins' free 
technical support services. Customer must notify Canoga Perkins promptly in writing of any claim based 
on warranty. Canoga Perkins is not liable for, and does not cover under warranty, any costs associated with 
servicing and/or the installation of its products or for any inspection, packing or labor costs in connection 
with return of goods. In the event Canoga Perkins breaches its obligation of warranty, customer's sole and 
exclusive remedy is limited to replacement, repair, or credit of the purchase price, at Canoga Perkins' 
option.  Under no circumstance will Canoga Perkins be liable for consequential or incidental damages or 
loss of profits.  

Warranty Registration 

To establish original ownership and to record purchase date, please complete the warranty on-line form on 
our product registration page. URL: 

www.canoga.com/warranty

 

Optional Service Programs

 

Canoga Perkins offers several optional Service Programs.  Please call Canoga Perkins Sales Department 
(818-718-6300) or see our web site (www.canoga.com) for details. 

CUSTOMER SERVICE DEPARTMENT REPAIR WARRANTY 

Repairs performed by the Canoga Perkins Customer Service Department will be free from defects in 
material and workmanship for a period of ninety (90) DAYS from the date the repaired product is shipped, 
or until the expiration of the original factory warranty, whichever is longer. 

 

3240S Fiber-Optic Multiplexer 

A-1

 

Содержание 3240S



















































Отзывы: