background image

10

Topstone Neo Carbon OMS

11

Safety Information

Operation

Safety Information

Operation

138222 Rev 1 (03/20)

Batterys & Chargers

REPLACEMENT - Only use the  battery pack and charger  indicated in the Secifications of this 
supplement. Do not use other batteries or chargers. Do not use the charger to charge other 
batteries.

PREVENT DAMAGE - Do not drop the battery or charger. Do not open, disassemble, or modify 
the battery or charger. No user serviceable parts inside.

Keep the battery out of intense sunlight.  Keep away from heat. Heat will damage the battery.

Keep battery away from paper clips, coins, keys, nails, screws or other small metal items, to 
prevent shorting exposed battery contacts. Shorting battery contacts can cause severe burns, 
fire, or explosion.

STORAGE & TRANSPORTATION - When the battery is not in use in the bicycle,  its 
transportation is subject to  hazardous materials regulation.  Special packaging and labeling 
requirements may exist.   Contact local authorities for specific requirements.  Never transport 
a damaged battery. Insulate battery contacts before packaging.  Package battery inside a 
shipping container to prevent damage.  The battery must be removed before flying and may 
be subject to special handling by the air carrier.

CHARGING - Bring indoors  and allow to reach room temperature before charging. Make sure 
charger and A/C outlet are the same voltage. 

Locate both charger and battery indoors, in a clean, dry area with good ventilation to charge. 
Make sure the area is free from combustibles to avoid fire from sparks or overheating.  Keep 
charger ventilation openings unobstructed.  Do not cover the charger or the battery.  

Disconnect the battery from the charger unit when fully charged. Do not leave a fully charged 
battery connected to the charger. Unplug the charger from the wall outlet when not in use.

Maintain the battery and the charger as directed by the manufacturer’s instructions. 

DISPOSAL- Battery pack/charger contain regulated materials and must be disposed/
discarded in accordance with national and/or local laws. Do not discard the battery/charger 
into fire, water or ordinary household waste/garbage. Take  to a waste facility/recycler. 

FAILURE TO OBSERVE THESE WARNINGS CAN RESULT IN ELECTRICAL FIRES, 
EXPLOSION, OR SEVERE BURNS OR ELECTROCUTION.

Commuting

EQUIPMENT - Any bicycle Including an 
drive-assisted bike (ebike)  must be 
properly equipped for commuting 
including any legally required lights, 
signals, and registrations.  Ask your 
Authorized Cannondale Retailer if 
commuting is within the scope of your 
bike’s intended use and if your bike is 
properly equipped for commuting.

DANGERS - Operating an E-bike as a 
commuting vehicle is no less dangerous 
than an ordinary pedal bike or automobile. 
E-Bikes are certainly not designed to 
protect you in a crash. Do not assume the 
bike or its drive capability will protect you 
or keep you from being involved in a 
serious accident.

NIGHT RIDING- Riding at night on a 
E-Bike or pedal-only bikes is very 
hazardous.   

Read the topic “Riding at Night” in your 
Cannondale Bicycle Owner’s Manual  now 
for more information on the many hazards 
of  riding at night.

You must operate with a very high degree 
of awareness and precaution to only 
reduce the risk of death or serious injury.

Mounting an External Battery 

Do not attach any external battery to the 
down tube water bottle location.    

The water bolt bosses are not intended to 
carry the weight of a battery.  

If you ignore this warning, attaching an 
external battery to this location could 
damage the frame and/or detach from the 
frame while riding, resulting in an 
accident serious injury, paralysis  or 
death.

No Modification

DO NOT MODIFY THIS BICYCLE/DRIVE 
SYSTEM/ IN ANY WAY FOR ANY 
REASON.
  Doing so can result in severe 
damage, faulty or dangerous operating 
conditions, or violation of local laws. 

Dealers and Owners MUST NOT change, 
alter, or modify in any way the original 
components  of the bicycle or drive-assist 
system  (e.g. the specified sizing of the 
attached gear ratios (front/rear chain 
rings).  

Attempts to “hot-rod” or “improve” the 
speed of the bike are dangerous to the 
rider.  Use only specified Cannondale and/
or manufacturer drive-assist service and 
replacement parts. 

Содержание Topstone Neo Carbon





















Отзывы: