4
Topstone Neo Carbon OMS
5
IDENTIFICATION
Parts of Your E-Bike
Safety Information
Intended Use
138222 Rev 1 (03/20)
IDENTIFICATION
5
4
10
8
6
2
3
7
9
1
Serial Number
The serial number is located on downtube.
It is a 7-character code. Use this serial
number to register your bike.
To register your bike: go to the
Product Registration section of our
website at www.cannondale.com
Record YOUR Serial Number here:
________________________________________
Actual bike appearance will differ.
Parts of Your E-Bike
Identification
1. Drive Display
2. Drive Unit
3. Battery Cover
4. Battery Key
5. Charge Port
6. Frame Serial Number
7. Wheel Sensor
8. Spoke Magnet
9. Front Chainrings
10. Rear Cassette
SAFETY INFORMATION
Intended Use
The intended use of all
models is
ASTM CONDITION 2,
General Purpose Riding.
What is an E-Bike?
Electric bikes, also known as “E-Bikes” are
bicycles equipped with an electric pedal
assist drive system. An E-Bike IS NOT a
moped or motorcycle. E-Bike share
components common with pedal-only bikes.
What is a Drive System?
The drive-assist system consists of a drive
unit, a battery, a computer control, and
various electronic components (harness
wires, sensors, and switches). There are
many different drive-assist systems for
differing uses and bike types. Likewise there
are various drive-assist system
manufacturers (Shimano, BOSCH, Bafang,
Yamaha, etc.)
How does the Drive System work?
It is important to know that when the
drive-assist system is turned ON, the drive
unit engages to provide power only while you
are pedaling.
The amount of power provided by the drive
unit depends on your pedaling force and the
assistance mode/level you set with the
handlebar control unit. At anytime, if you
stop pedaling, the drive-assist will dis-
engage.
In all modes/levels, the drive-assist system
power reduces progressively and cuts off as
the bike reaches a the maximum allowable
speed. The drive-assist re-engages when
speed drops below the maximum allowable
speed as long as the pedals are turning.
Whenever the drive-assist system is turned
OFF, you can pedal the bike normally. The
drive system will not engage.
Understand your bike, its drive-assist
system and the intended use of both.
Using your bike the wrong way is
dangerous.
Please read your Cannondale Bicycle
Owner’s Manual for more information
about Intended Use and Conditions 1-5.
Servicing
This supplement may include procedures
beyond the scope of general mechanical
aptitude.
Special tools, skills, and knowledge may
be required. Improper mechanical work
increases the risk of an accident. Any
bicycle accident has risk of serious injury,
paralysis or death.
To minimize risk we strongly recommend
that owners always have mechanical
work done by an Authorized Cannondale
Dealer.
