background image

18

Topstone Neo Carbon OMS

19

Technical Information

Powertube Battery

Technical Information

Powertube Battery

138222 Rev 1 (03/20)

Powertube Battery

To remove the battery:

1.   Secure the bike upright to prevent it from 

falling over.

2.  Make sure the bike drive system is OFF.
3.  Lift out the key cover from the frame; 

insert the key (5) into the key slot (8).  

 

Turn the key clockwise to permit the 

release of the battery.  

 

Use your hand to lift the battery handle 

feature (9) at the bottom edge of the 

battery cover out slightly.

4.   Press in on the battery release tab (7)

located on the lower part of the battery. 

 

Once pressed, the battery will be allowed 

to slide out from the lower battery 

mount.

To install the battery:

1.   Secure the bike upright to prevent it from 

falling over.

2.  Insert the upper battery so that the 

battery socket engages with the upper 

frame connector (4).

The drive system battery (2) is housed within the bicycle downtube.

The battery can be charged via the charge port (9) or removed for charging.

3.  Press in on the lower part of the battery 

and turn the key clockwise to lower the 

latch. 

 

Turn the key counter-clockwise to re-en-

gage the lower locking mechanism (6).

4.  Remove the key.

NOTICE

Do not ride the bike without the battery 

cover installed. Dirt, water and other 

contaminants can enter frame and/or 

damage the battery. 

Periodically, check to make sure the 

battery is securely mounted inside the 

frame.
Check the battery after any fall or impact.  

Check for loose or damaged parts.
Use only the specified battery.  Do not 

modify the battery or other parts.
If you take the battery out, replace and 

secure the battery cover on the frame.
If damage is found; do not ride the bike.  

Have any damaged part replaced with 

a new one.  Contact your Cannondale 

Dealer.

Top view

Bottom view

3

4

7

6

1

2

Do not tamper/

battery-to-cover 

attachment only

5

9

9

10

1.  Battery Cover

2. Battery

3.  Battery Connector

4.  Frame Connector

5.   Key 

6.  Battery Latch

7.  Battery Release Tab

8.  Key Slot

9.  Charge Port

10. Battery Handle

Identification

Содержание Topstone Neo Carbon





















Отзывы: