10
11
125637.PDF
i-MOTION 9 ANd SpINdlE
SPINDLE
HUB CAP
OUTER
BEARING
LAND
INNER
BEARING
LAND
AXLE END
SLOTS
CHAINCASE
SRAM i-MOTION 9
REAR HUB ASSEMBLY
(disconnected)
125149
The SRAM i-MOTION 9 rear hub is housed inside a spindle which connects to the ON SiCC chaincase.
This assembly must not be removed from the chaincase. It is connected with a special manufacturing tool.
If this unit requires service, please contact Cannondale for information on how to handle the request.
Shifting set-up of the i-MOTION 9 rear hub is described on page 12.
REAR WhEEl hub & WhEEl TRuING
REAR WHEEL TRUING TOOL
125156
125155
125170
OUTER
BEARING
INNER
BEARING
REAR HUB ASSY
125154
AXLE NUT
RING CLIP
BRAKE ROTOR
ROTOR BOLTS
4.5 Nm, 40 InLbs
Loctite® 266™
M4x8
en
A wheel truing tool is available to Cannondale Dealers so that the wheel may be positioned in a traditional wheel stand.
It is necessary to remove the axle hub bolt from the end of the hub shell to insert the tool parts.
