background image

125367.PDF

1

EN - 02/10

SAFETY INFORMATION

AbOuT ThIS SupplEMENT 

Cannondale Owner’s Manual Supplements provide 
important model specific safety, maintenance, and technical  
information.   They are not replacements for your 

Cannondale 

Bicycle Owner’s Manual.

This supplement may be one of several for your bike.   Be sure 
to obtain and read all of them. 

If you need a manual or supplement, or have a question 
about your bike,  please contact your Cannondale Dealer 
immediately, or call us at one of the telephone numbers listed 
on the back cover of this manual.  

You can download Adobe Acrobat PDF versions of any 
Cannondale Owner’s Manuals or Supplements from our 
website: 

http://www.cannondale.com/bikes/tech.

•   This  manual  is  not  a  comprehensive  safety  or  service 

manual for your bike. 

•   This  manual  does  not  include  assembly  instructions  for 

your bike. 

•   All Cannondale bikes must be completely assembled and 

inspected  for  proper  operation  by  a  Cannondale  Dealer 
before delivery to the owner.

WARNING

This supplement may include procedures beyond the 
scope of general mechanical aptitude.  

Special tools, skills, and knowledge may be required. 
Improper mechanical work increases the risk of an 
accident.   Any bicycle accident has risk of serious 
injury, paralysis or death. To minimize risk we strongly 
recommend that owners always have mechanical work 
done by an authorized Cannondale retailer. 

hEAdShOk SOlO w/dl50 bIcYclE FORk 

SupplEMENT

Please consult the  Cannondale  

Solo Bicycle Fork Owner’s 

Manual Supplement  

 for care and maintenance information 

concerning the fork and front wheel removal and installation.

REAR bRAkE ROTOR

WARNING

kEEp YOuR hANdS ANd FINGERS clEAR OF  ThE 

bRAkE ROTOR ANd chAINcASE!!   

chAINcASE hub cAp 

NOTIcE

dO NOT RIdE ThIS bIkE WITh ThE chAINcASE hub 

cAp REMOvEd.  

Serious damage to the hub will result.  

See page 13.

bIcYclE REpAIR / WORk STANdS

The clamping jaws of a bike stand can generate a crushing 
force strong enough to seriously damage  your frame.  

NOTIcE

Never place your bike in a bike stand by clamping the 
frame.   

Place your bike in a stand by extending the seat post and 
positioning the stand clamp on the extended seat post.   
Don’t extend beyond the MINIMUM INSERT line marked 
on the seat post.

Since a seat post can also be damaged by clamping force, 
adjust the stand clamp for the minimum clamping force 
needed to secure the bike.

Also, before clamping,  clean the post and protect the seat 
post finish with a rag.

Содержание ON














Отзывы: