Cannondale Jekyll, Дополнение к руководству пользователя

Страница: 16 / 28

14
1
8
13
9
9
16
17
7
2
1
4
3
5
14
18
. 5”
15
11
20
19
10
8
6
12
5-10 InLbs
FOx DYAD RT2 PULL SHOCK
The DYAD RT2 rear shock was engineered and manufactured by Fox Racing Shocks in collaboration with Cannondale. This supplement
includes safety information, and instructions on how to set-up and operate the shock in the frame. For the manufacturer’s specific
maintainance and service instructions, you must go to the Fox Racing Shox original equipment (OE) custom products website. Go
to
http://www.foxracingshox.com/fox_tech_center/owners_manuals/09/custprod/index.html
Identification
1. ELEVATE - 150 mm Rebound
2. FLOW - 90 mm Rebound
3. Negative Air Valve
4. Positive Air Valve
5. Valve Cap
6. Long Travel Chamber
7. Short Travel Chamber
8. Spool Chamber
9. Spool Chamber End Caps
10. Fixed Eyelet
11. Shaft Eyelet
12. Cable Anchor
13. Cable Set Screw
14. Remote Lever Cable
15. Cable End Cap
16. Ferrule
17. Remote Lever Cable Housing
18. Bridge
19. Bushing
20. Reducer
NOTICE
Wash with soap and water only. Never use a high
pressure washer to clean.
Mount shock as shown in photo, next page. Do
not mount shock in a different position. Severe
damage to the frame, link, or shock can result.