Cannondale Jekyll страница 17 Скачать руководство пользователя

Страница: 17 / 28

126560.PDF

Maintenance & Service Information

WARNINGS

HIGH-PRESSURE HAZARD - Do not open, disassemble, modify, or attempt to perform internal service to the shock.

The DYAD RT2 shock is not user serviceable. Never attempt to remove the spool chamber end caps for any reason! Attempting

to perform any mechanical service procedure on this shock can potentially result in serious injury or death. Remote lever cable

installation must be performed by a professional bike mechanic.
All service and repair must only be performed by FOX Racing Shox or an FOX Authorized Service Center.

For more informatiomn contact: http://www.foxracingshox.com/fox/contact

Frame Installation

Please note that the DYAD RT2 is to be mounted only in the frame in the position shown below.

Pre-Ride Checks

1. Clean the outside of your shock with soap and water and wipe dry with a soft dry rag. Inspect the entire exterior of the shock.

DO NOT RIDE THE SHOCK IF YOU FIND DAMAGE.

Please contact FOX Racing Shox for further inspection and repair.

2. Set Sag. See

Setting Sag.

Set Rebound. See

Setting Rebound

Содержание Jekyll





























Результаты поиска

Содержание Jekyll

Отзывы:

Похожие инструкции для Jekyll

Бренды по названию

Популярные бренды

Cannondale Jekyll, Дополнение к руководству пользователя

Результаты поиска

Содержание Jekyll

Отзывы:

Похожие инструкции для Jekyll

Бренды по названию

Популярные бренды