53
Printed : 1/9/02
53
frame using the mounting bolts as this will
cause damage to the fuel tank or other vehicle
systems.
3.
Install the tank mounting bolts and tighten them
to the specified torque.
TO R Q U E :
Fuel tank m ounting bolts
5.0 lbf•ft (6.8 N• m)
4.
Reinstall the outlet (left side) and return (right
side) fuel hoses into the tank. When reinstalling
the quick connect fittings, be sure to press the
fitting tabs in first. Then inspect the O-rings for
any damage (e.g., swelling, distortion, tears,
rips, etc.) and replace if necessary. Apply a
light coat of engine oil to the O-rings and insert
the hoses into the tank until the fitting clicks.
5.
Reinstall removed components. Consult the
Torque Table in this manual for tightening
torques.
FUEL FILTER REPLACEMENT
S E RV IC E :
Fuel filter
Fram , G -4164
Accumulation of dirt in the fuel filter will restrict fuel
flow. Proper fuel flow and pressure is critical to the
reliability of the fuel injection system and level of
vehicle performance. Therefore, the fuel filter should
be inspected frequently and replaced in accordance
with the Maintenance Schedule in this manual.
Replace the fuel filter every 5 hours of operation.
We recommend that you keep a few extra filters
handy so that frequent replacement is hassle free.
Gasoline is extremely flammable and can
explode under certain conditions. Handle with
care in an area free of sparks, cigarettes,
welders, other sources of ignition.
1.
Press in the tab and remove the tank outlet
fitting and hose from the tank.
2.
Hold the filter in a clean shop towel and loosen
the filter hose clamps allowing fuel in the hose
to be absorbed by the towel.
3.
Remove the filter.
4.
Reinstall a new replacement filter making sure
to observe the flow indicator on the filter body.
a
1
LUBRICATE
O-RING
BEFORE
INSERTING
