background image

4

Compact Neo OMS

General Safety Information

Intended Use

151990 Rev0 (09/22)

General Safety Information

Intended Use

The intended use of all 

models is  

ASTM CONDITION 2,  

General Purpose Riding.

What is an E-Bike?

Electric bikes, also known as “E-Bikes,” are 
bicycles equipped with an electric  
pedal-assist drive system.  An  E-Bike IS NOT 
a moped or motorcycle.   E-Bikes share 
components common with pedal-only bikes. 

What is a Drive System?

The drive-assist system consists of a drive 
unit, a battery, a computer control, and 
various electronic components (harness 
wires, sensors, and switches). There are 
many different drive-assist systems for 
differing uses and bike types. Likewise there 
are various drive-assist system 
manufacturers (Shimano, BOSCH, Bafang, 
Yamaha, etc.).

How does the Drive System work?

It is important to know that when the 
drive-assist system is turned ON, the drive 
unit engages to provide power only while you 
are pedaling. 

The amount of power provided by the drive 
unit depends on your pedaling force and on 
the assistance mode/level you set with the 
handlebar control unit. At anytime, if you 
stop pedaling, the drive-assist will dis-
engage. 

In all modes/levels, the drive-assist system 
power reduces progressively and cuts off as 
the bike reaches the maximum allowable 
speed. The drive-assist re-engages when 
speed drops below the maximum allowable 
speed as long as the pedals are turning.

Whenever the drive-assist system is turned 
OFF,  you can pedal the bike normally.  The 
drive system will not engage.

Understand your bike, its drive-assist 

system, and the intended use of both. 

Using your bike the wrong way is 

dangerous.
Please read your Cannondale Bicycle 

Owner’s Manual for more information 

about Intended Use and Conditions 1-5. 

Servicing

This supplement may include procedures 
beyond the scope of general mechanical 
aptitude. 

Special tools, skills, and knowledge may 
be required. Improper mechanical work 
increases the risk of an accident.  Any 
bicycle accident has risk of serious injury, 
paralysis, or death. 

To minimize risk we strongly recommend 
that owners always have mechanical 
work done by an Authorized Cannondale 
Dealer. 

Содержание Compact Neo













































Отзывы: