24
Compact Neo OMS
Drive System
Charger 2A
151990 Rev0 (09/22)
• Do not damage the power cord or power plug.
(Do not damage, process, forcibly bend, twist or
pull them, bring them near hot objects, place
heavy objects on them, or bundle them tightly
together.)
If the power cord or power plug are used while
damaged, fire, electric shocks, or short-circuits
may occur.
• When charging the battery while it is installed
on the bicycle, do not move the bicycle. The
battery charger’s power plug may come loose
and not be fully inserted into the electrical
outlet, resulting in a risk of fire.
• When charging the battery while it is mounted
on the bicycle, be careful not to trip over the
charger cord. This may lead to injury or cause
the bicycle to fall over, damaging the
components.
• CAUTION - According to ECP, when the
battery is in over-charged/over-discharged
conditions, the battery will automatically
disconnect the circuit for safety protection.
• Check your battery pack before using it for the
first time. First, you must turn on the battery
pack; if the charging LED did not light up, it
means that this battery pack might be
damaged.
• Make sure to charge the battery pack fully
before using it for the first time.
• Do not try to use or to charge damaged
battery packs.
• When charging, do not place any items 50 cm
around the battery and make sure the battery
and the charger are on a fireproof surface.
• Do not leave batteries in the charger for more
than 24 hours. If the charging cannot complete
in 24 hours, contact your local bicycle dealer for
assistance.
The battery pack can be charged under any
power mode; interrupting the charging process
will not damage the battery pack.
• CAUTION - The battery packs are partially
charged before they were shipped; to ensure
that the battery has full and sufficient power,
please charge your battery pack fully before
using it for the first time.