30
Compact Neo OMS
Drive System
Bottom Bracket Torque Sensor
151990 Rev0 (09/22)
TO PREVENT MALFUNCTION OR RIDER
INJURY:
The stop mark of the Hyena spindle
(Cannondale Part# K77011 ) must be
located on the drive side.
NOTICE
TO PREVENT SPINDLE DAMAGE:
1. Disconnect the cable BEFORE
removing the spindle. Failure to
disconnect the torque sensor cable
before removal will result in breaking
the cable.
2 DO NOT remove the drive side BB cup
BEFORE removing the spindle. The
spindle should be removed from the
non-drive side.
Damage resulting from incorrect service
procedure is not covered under limited
warranty.
Drive side
Stop mark
The Hyena ST-SQ-1A Cannondale Part number: K77011 bottom bracket/torque sensor is located
inside the frame bottom bracket shell. This part like other drive system components should only be
serviced by a professional bicycle mechanic.
When service is required, it is important to understand that the stop mark is located on the drive
side of the bicycle. Also the torque sensor cable must be disconnected before removing the spindle
from the frame.
Bottom Bracket Torque Sensor
