background image

E-Series Owner’s Manual Supplement - 130374

 E

Sp

Ol

ITal

Ia

NO

NEDER

la

NDS

FR

aNÇ

aIS

DEUT

SCH

ENGLISH

5

oPeratIon

Notes on Riding with the  

eBike System

When does the eBike Drive Operate?

The eBike drive supports you when riding, as long as you step into 
the pedals. Without pedaling, there is no assistance. The motor 
output always depends on the amount of your pedaling power.

When applying less pedaling power, the assistance or support will 
be lower than when applying a lot of pedaling power. This applies 
independent of the assistance Level.

The eBike drive automatically switches off at speeds in excess 
of 25 km/h. When the speed falls below 25 km/h, the drive is 
automatically available again. An exception applies for the push-
assistance function, in which the eBike can be pushed at low speed 
without pedaling. The eBike can also be ridden as a normal bicycle 
without assistance at any time, by either switching off the eBike 
system or setting the assistance level to “OFF”. The same applies 
when the battery pack is empty.

Interaction of the eBike System with the Bicycle Gears

The bicycle gears should be used as with a normal bicycle, even 
with eBike drive (please observe the operating instructions of your 
eBike).

Independent of the type of gearing, it is recommended to briefly 
interrupt the pedaling while changing gears. This makes changing 
gears easier and reduces the wear of the drive train.

By selecting the right gear, you can increase the speed and range 
with the same pedaling effort.

Gathering first Experience

It is recommended to gather first experience with the eBike away 
from roads with heavy traffic.

Try out the different assistance levels. As soon as you feel safe, you 
can participate in traffic with the eBike as with any other bicycle.

Test the operating range of your eBike under different conditions 
before planning longer and more challenging rides.

factors Affecting Assistance Range

1.  Battery Charge  Level

 -   A fully charged battery will provided 

the greatest range.   Before every ride,  make sure the battery 
is fully charged.

2.  Assitance Mode & Support Level

 -  The assistance mode and 

support level you select during the ride will affect the operating 
range. 

3.  Temperature & Wind Conditions

 - Extreme cold or hot 

conditions will result in more rapid depletion of the battery’s 
energy, reducing available  range.   Overcoming strong  winds 
on the cycling route will shorten assistance range since more 
battery energy is required.  Conversely, a tailwind  (wind behind 
you) acts to propel the cycle reducing the energy requirement.   

4.  Rider Weight & Cargo 

- Adding weight to the bicycle (rider or 

cargo) cycle will require the drive unit to work harder, requiring 
more battery energy - shorter range.   If you carry a backpack 
or extra luggage on the rack, more energy will be needed, and 
overall range will be reduced. 

5.  Tire Pressure/Condition-

  Make sure your tires are in good 

shape (e.g. good tread, undamaged) and  pressurized properly 
according to the tire sidewall markings.  Poor tire condition or 
Inadequate air pressure will shorten range.

6.  Shifting Gears & Braking 

- You should shift gears similarly to 

a normal pedaling bicycle.  Efficient gear changes will result in 
greatest available range.   Maintaining a uniform speed and 
effective braking will help you maximize the energy stored in 
the battery.   

7.  Accelerating from Stopped 

- The drive system utilizes more 

battery energy during it initial acceleration.   Therefore, a 
commute with frequent starting and stopping  will consume 
more energy, shortening range.  You can extend your range by 
carefully managing your speed throughout the trip to avoid 
unnecessary starts and stops.

8.  Drive Chain Condition

 - Be sure to keep the chain clean and 

well lubricated.  Have the chain replaced with a new one.

9. Pedaling 

-  Pedaling steadily with moderate effort with the 

drive unit  will result in the greatest range.  While all that is 
requirted to engage the assistance is a turning pedal, you’ll 
want to contribute especially on uphill or rough terrain.  If you 
rely solely on the drive unit,  the range will be much shorter.

Содержание 2014 MAVARO


























Отзывы: