15
Printed : 1/9/02
15
H E A D L I G H T
The headlight is located at the front of the vehicle
and is activated with the headlight/ taillight switch.
The highlight can be switch to HI or LO intensity with
the headlight switch. Be sure the headlight is
fastened securely with the mounting straps and
operating properly (HI and LO intensity) before
starting out.
Details on bulb replacement can be found in the
Maintenance and Adjustment section of this manual.
TA I L L I G H T
The taillight with the headlight/taillight switch. It
should light in both the HI or LO switch position. It is
NOT a braking light!
Make sure it is operating properly before starting
out.
NOTE :
Remember that the lighting circuits are energized
through the engine management system power
relay. This relay is controlled by the ECU. The ECU
will shut down the system automatically after 2
minutes if the engine is not started or the START
button has not been pressed. In short, the lights can
be turned on as long as the engine management
system is activated.
The taillight should be activated in both switch
positions (HI and LO). If it does not light, check to
see if a fuse or bulb replacement is needed. Correct
the problem before riding.
Details on bulb replacement can be found in the
Maintenance and Adjustment section of this manual.
1. Headlight
2. Mounting straps (left fork)
3. Headlight/Taillight switch
1
2
3
1. Taillight
1
