Cannon imageRUNNER 5050, Руководство по эксплуатации

Страница: 90 / 268

Paper Deck-AD1/Paper Deck-AE1 (Optional) 2-22
2
Ro
utine Main
te
nan
ce
IMPORTANT
•
Rewrap any remaining paper in its original package, and store it in a dry place,
away from direct sunlight.
•
Do not load the following types of paper into the paper deck. Doing so may cause a
paper jam.
- Severely curled or wrinkled paper
- Thin straw paper: less than 17 lb bond (64 g/m
2
) (approximately)
- Transparencies or tab paper
- Paper which has been printed on using a thermal transfer printer (Do not print on
the reverse side of this paper either.)
NOTE
•
For high-quality printouts, use paper recommended by Canon.
•
Before loading paper, always fan the sheets several times, and align the edges to
facilitate feeding.
3
Load the paper stack into the paper deck.
Make sure that the inside lifter has lowered before loading paper, and even out
the edges of the paper stack.
IMPORTANT
•
Paper which has been rolled or curled must be straightened out before loading it
into the paper deck.
•
Make sure that the height of the paper stack does not exceed the loading limit mark
(
) on the inside of the paper deck.