Cannon imageRUNNER 5050, Руководство по эксплуатации

Страница: 225 / 268

List of Error Messages 3-87
3
T
rou
b
lesh
o
o
ti
ng
List of Error Codes without Messages
If a job or operation does not complete successfully, check the error code, and
perform the necessary operations according to the error code displayed. You can
check the error code on the Details screen when you press [Log] on the System
Monitor screen. (See Chapter 5, "Checking Job and Device Status," in the
Reference Guide .)
If a send, receive, or fax job does not complete successfully, the error code is
printed in the Results column on the Activity Report and Send Report. However, if a
send job is canceled, "STOP" is printed in the Results column on the Send Report.
(See Chapter 12, "Printing Communication Reports," in the
Sending and Facsimile
Guide .)
Perform the necessary procedures according to the error code.
# 001
Cause 1 Differently sized originals were scanned, and the Different Size Originals mode
was not set.
Remedy Place your originals, specify the Different Size Originals mode, and try scanning
again.
Cause 2 Differently sized originals were scanned in the 2-Sided mode, and the Different
Size Originals mode was not set.
Remedy Place your originals, specify the 2-Sided and Different Size Originals modes,
and try scanning again.
# 009
Cause 1 There is no paper.
Remedy Load paper. (See "Paper Drawers," on p. 2-2.)
Cause 2 The paper drawer is not inserted correctly into the machine.
Remedy Insert the paper drawer properly. (See "Paper Drawers," on p. 2-2.)