Cannon imageRUNNER 5050, Руководство по эксплуатации

Страница: 144 / 268

Clearing Paper Jams 3-6
3
T
rou
b
lesh
o
o
ti
ng
1
Inspect all paper jam locations indicated on the touch panel
display, and remove any jammed paper.
See the appropriate pages below for instructions on finding and removing
jammed paper. Or, you can follow the instructions on the touch panel display.
If jammed paper tears while it is being removed, be sure to remove any
remaining pieces from inside the machine.
IMPORTANT
If the machine's power is turned OFF when there is a paper jam, detection of paper
jams in the paper drawers is not possible after the power is turned back ON. Clear
paper jams without turning the power OFF.
NOTE
•
Some areas that are shown to have paper jams may not actually have paper jams.
However, always check all locations indicated on the touch panel display in the
order that is given.
•
The page number describing how to remove the jammed paper is also shown
below.
- Feeder (See "Feeder," on p. 3-11.)
- Main Unit (Fixing Unit and Duplexing Unit)
(See "Main Unit (Fixing Unit and Duplexing Unit)," on p. 3-15.)
- Stack Bypass (See "Stack Bypass," on p. 3-21.)
- Upper and Lower Right Cover (See "Inside the Upper and Lower Right Covers,"
on p. 3-23.)
- Paper Drawers 3 and 4 (See "Paper Drawers 3 and 4," on p. 3-31.)
- Paper Drawer 1 (See "Paper Drawer 1," on p. 3-26.)
- Paper Drawer 2 (See "Paper Drawer 2," on p. 3-29.)