EN-12
a.
If you don’t set the power within 1 minute, the induction hob will
automatically switch off. You will need to start again at step 1.
b.
You can modify the heat setting at any time during cooking.
c.
If slide along the “—”, power will vary from stage 1 to stage 9.
If the display flashes
alternately with the heat
setting
This means that:
•
you have not placed a pan on the correct cooking zone or,
•
the pan you’re using is not suitable for induction cooking or,
•
the pan is too small or not properly centred on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 1 minutes if no suitable pan is placed
on it.
When you have finished cooking
1. Turn the cooking zone off by slide along the “—” to the left point, and then hold
for 1 second.
Make sure the power display shows “0”, then shows “H”.
and then
3.
Turn the whole cooktop off by touching the ON/OFF control.
4.
Beware of hot surfaces
‘H’ will show which cooking zone is hot to touch. It will disappear when the
surface has cooled down to a safe temperature. It can also be used as an
energy saving function if you want to heat further pans, use the hotplate that
is still hot.
