EN-15
Spillovers on the
touch controls
1. Switch the power to the
cooktop
off.
2. Soak up the spill
3. Wipe the touch control area
with
a clean damp sponge
or
cloth.
4. Wipe the area completely
dry
with a paper
towel.
5. Switch the power to the
cooktop
back on.
•
The cooktop may beep and turn
itself
off, and the touch controls
may not function while there is
liquid on them. Make sure you
wipe the touch control area dry
before turning the cooktop back
on.
Hints and Tips
Problem
Possible causes
What to do
The
c
ooktop cannot
Be turned on.
No power.
Make sure the cooktop is
connected
to the power supply
and that it is
s
witched on.
Check whether there is a power
outage in your home or area.
If
you’ve checked everything
and the
problem persists, call a
qualified
t
echnician.
The touch controls are
unresponsive.
The controls are locked.
Unlock the controls. See section
‘Using your
ceramic cooktop’
for
instructions.
The touch
controls are
difficult to operate.
There may be a slight film of
water over the controls
or you
may be using the tip of your
finger when touching the
controls.
Make sure the touch control
area is
dry and use the ball of
your finger
when touching the
contr
ols.
The glass is being
scratched.
Rough
-
edged cookware.
Unsuitable, abrasive scoure
r or
cleaning products being used.
Use cookware with flat and
smooth
bases. See ‘Choosing
the right
cookware’.
See ‘Care and cleaning’.
Some pans make
crackling or
clicking
noises.
This may be caused by the
construction of your cookware
(layers of diff
erent metals
vibrating differently).
This is normal for cookware and
does not indicate a fault.
