25
INSTALLATION
Installing a domestic appliance can be a complicated operation wich if not carried
out correctly, can seriously affect consumer safety.
It is for this reason that the task should be undertaken by a professionally
qualified person who will carry it out in accordance with the technical regulations
in force.
In the event that this advice is ignored and the installation is carried out by an
unqualified person, CANDY declines all responsibility for any technical failure of
the product whether or not it results in damage to goods or injury to individuals.
• Before installing the appliance :
- Check the compatibility between the cooker and the gas installation.
The cooker is factory set for use with the gas type as stated on the packaging and
repeated on the rating plate affixed to the cooker.
Natural gas G 20-20 mbar / G 25-25 mbar : main gas
- If necessary, change the gas.
To adapt the cooker fit suitable jets that provide the nominal flow rate and setting the
minimum flow of the hob gas burners on pages 26 to 28.
• For installation the technician must :
The cooker is Class 1 or Class2 - Sub class 1 ; furniture adjacent to the unit must not
be higher than the top of the cooker.
- The cooker has adjustable feet for perfect levelling on the floor.
- Do not remove the cooker spacers at the back.
- Make the gas connection to the installation according to the gas supply, page 27-28,
by connecting the gas supply pipe without forgetting to fit the seal.
- Connect the cooker electrically in compliance with the information given on page 29.
- If the gas type has been changed, adjust the minimum flow of each gas burner on page
28.
Any modification made to the gas setting should be noted on the rating
plate affixed to the cooker.
Содержание CGE 650 S
