C&T Solution CT-MCL01 Series, Руководство пользователя

Страница: 4 / 72

CT-MCL01 l User’s Manual
4
Safety Information
Electrical Safety

To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before
relocating the system.

When adding or removing devices to or from the system, ensure that the power cables for the
devices are unplugged before the signal cables are connected. If possible, disconnect all power cables
from the existing system before you add a device.

Before connecting or removing signal cables from the motherboard, ensure that all power cables are
unplugged.

Seek professional assistance before using an adapter or extension cord. These devices could interrupt
the grounding circuit.

Make sure that your power supply is set to the correct voltage in your area. If you are not sure about
the voltage of the electrical outlet you are using, contact your local power company.

If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or
your retailer.
Operation Safety

Before installing the motherboard and adding devices on it, carefully read all the manuals that came
with the package.

Before using the product, make sure all cables are correctly connected and the power cables are not
damaged. If you detect any damage, contact your dealer immediately.

To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and
circuitry.

Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may
become wet.

Place the product on a stable surface.

If you encounter technical problems with the product, contact a qualified service technician or your
retailer.
Safety Declaration
This device complies with the requirements in Part 15 of the FCC rules. Operation is subject to the
following two conditions:

This device may not cause harmful interference.

This device must accept any interference received, including interference that may cause undesired
operation.
Preface
The symbol of the crossed out wheeled bin indicates that the
product (electrical and electronic equipment) should not be placed
in municipal waste. Check local regulations for disposal of
electronic products.