Modular floating systems
www.candock.com
9441, Bourque Blvd.
Sherbrooke (Qc) J1N 0G2
OFFICE
|
BUR.
T.FREE
|
S. FRAIS
FAX
|
TÉLÉC.
819 847-2599
1 888 547-2599
819 847-3250
OVERVIEWS
ASSEMBLY PROCEDURE
P.
17
Material/Composition :
SEACOAT TM corrosion protected steel
Aluminum
Needed tools :
Key for nut
or
Ratchet key for nut + ratchet tool
Accesories included with the winch
1 Aluminum mounting bracket
1 Pulling winch ( 1600 lbs capacity ) equipped with a 20 ‘ strap and 1 hook
1 20’ long rope spliced at both ends.
1 Pulley
1 fastening carabiner
1 Shackle
Other needed accesories
(sold separately)
4 CANDOCK LUG CONNECTOR
4 CANDOCK NUT
1 ANCHORING RING
Sometimes, for a boat less than 1360kg / 3000lbs, a winch may be required to put the boat afloat.
NOTE: **Turn the handle of the winch until the boat is enough in the water that it can back off on its own power. Do not back the boat
too much; it could slide in the water by itself.
1 – Install
the ALUMINUM MOUNTING BRACKET where the winch is needed.
2 – Complete by by securely fastening the
CANDOCK LUG CONNECTOR
and
CANDOCK NUT
against the cube tabs as describd in the
BASIC PRODUCTS OWNER’S MANUAL
CARABINER LOOP
PASS THE ROPE ON
TOP OF THE RING
LOCATED AT THE
FRONT OF YOUR BOAT
SHACKLE
ATTACHED TO
ANCHORING RING
WINCH
ROPE SECTION
STRAP SECTION
WINCH JETSLIDE BOAT (MAX 3000PDS/1360KGS)
