3
3..3
3 F
Fllu
ue
e L
Le
en
ng
gtth
h
Minimum Wall Thickness 3 in (75 mm)
8
F
Fiig
g.. 6
6
3
3..2
2 P
Prre
ep
pa
arriin
ng
g a
an
nd
d ffiittttiin
ng
g tth
he
e a
ap
pp
plliia
an
ncce
e
P
Prre
ep
pa
arra
attiio
on
n ::
- Remove the bottom trim by pulling forwards.
- Slide the controls facia plate (P) upwards to disen-
gage from retaining bracket.
- Release the front case by removing the four fixing
screws and washers positioned at the top, bottom
and centre of appliance.
- Remove the front case by lifting off the top locating
lugs and pulling forward to clear the water section
at the base of the appliance.
N
NO
OT
TE
E ::
A template is not supplied with this appliance.
Particular care is therefore necessary to ensure that
the appliance mounting bracket is fitted level and
positioned accurately. When using extended flues,
a fall fo 5 mm per metre length should be provi-
ded. (From turret to terminal) (see Fig. 5).
- Refer to the drawings opposite for rear and side flue
applications and/or to the dimensions given.
- Set out an drill hole 290 mm (11.4 in) accurately
mark position for bracket.
- Drill and plug the wall.
- Fix bracket to wall using No. 12 screws provided,
ensuring that the bracket is level. If necessary
adjust bracket, finally secure in position.
- Hang the appliance on the bracket, and re-check for
level. Mark bottom fixing holes, removes applian-
ce, drill and plug the wall to suit No 12 screws.
- Re-hang appliance and secure with screws provi-
ded.
Rear Outlet
Wall thickness
Up to 612.5 mm
Over 612.5 mm
Delivered with
Extension available
appliance
Pt No
1008520
Flue duct length = wall thi 25 mm
Air inlet duct length = wall thi 25 mm
Pt No. 1008520
Side Outlet
EM
Up to
500 mm
1401 mm
2300 mm
+ DM
500 mm
to 1400
to 2300
to 2787
Deliv.
1 extern.
2 extern.
3 extern.
With
Pt No
2 x
3 x
appliance
1008520
1008520
1008520
EM
= Wal thickness
Flue duct length EM + DM + 130 mm
DM
= Distance from wall to case
Air inlet duct length EM + DM + 130 mm
F
Fiig
g.. 5
5
EM
9
0
m
m
EM
DM
EM
9
0
m
m
EM
DM
3
.5
i
n
s
