C&K systems System 2316E Скачать руководство пользователя страница 28

Страница: 28 / 34

SYSTEM 2316E/2316EC Installation Manual

The recommendations contained in this section are designed to assist you in reducing false alarms. The first column contains the

Command Locations and Digit Positions in parentheses ( ). The second column is the recommended program option followed by a

brief explanation.

Program Option

Program Function

Comments

Arming/Combination

09 (2)

Combination

This feature is enabled to prevent unauthorized users from

Options

Command

activating certain keypad functions. When activated, this

command will require a valid User Combination to perform

such functions as Bypassing a Zone, Group Bypassing, Key-

pad Activated RPS, Central Station and Bell Testing, and

Instant Arming. For additional assistance with commands

requiring User Combinations, see page 24 (Command Sum-

mary).

Arming/Combination

09 (4)

Chirp Alert

This option minimizes the possibility of leaving the system

Options

unarmed (faulted) when exiting. The system is armed in the

normal manner and the user exits through the delayed exit

door. If the door does not close properly, returning the loop

to the normal state, the system will transition from the Exit

Delay to the Entrance Delay at the completion of the Exit

Delay time and chirp the Bell, alerting the user to the error in

arming the system.

Loop Control

1F - 26 &

Loop Response

This option determines the response time of the loop itself.

49 - 50 (2)

Time

It acts as a buffer on the loop to minimize the possibility of

fast acting sensors, such as swingers or window foil, produc-

ing false alarms.

Loop Control

1F - 26 &

Loop Restore Type This option is used in conjunction with CL 17 - 1E & 40 - 47

49 - 50 (3)

Digit Positions (3 & 4), Restore Reporting Code, and CL 2A

(2), Restore Receiver Select. The panel can be programmed

to send a Restoral Report only when the loop is normal and

the system is disarmed. With this arrangement, any loop

which is triggered multiple times while armed will only send

one alarm report until the system is disarmed. This prevents

the system from tying up the phone line with continuous alarm

and restoral reports.

Loop Control

1F - 26 &

Loop Arming Type

There may be occasions where it is desirable to program all

49 - 50 (4)

doors and interior points as delayed. Or you may need to

program interior zones to be delayed only during the Entry/

Exit Delay Time. This Command Location allows a variety of

Arming Types to help minimize false alarms.

Event Reporting

2A (5 & 6)

Cancel Report

This feature should always be enabled on reporting systems,

Code/Cancel

especially if the system does not send Opening and Closing

Report Receiver

Reports. A Cancel Report is sent to the monitoring station in

Select

the event that an Authorized User clears the alarm while the

bell is still active. The Cancel Report Code (Digit Position 5) is

actually a two-digit code with the first digit being programmed

by the installer and the second digit being the User ID # when

the report is sent. Digit Position (6) determines which receiver

gets the Cancel Report.

RECOMMENDATIONS FOR REDUCING FALSE ALARMS

Содержание System 2316E


































Результаты поиска

Содержание System 2316E

Отзывы:

Похожие инструкции для System 2316E

Бренды по названию

Популярные бренды

C&K systems System 2316E, Руководство по установке

Результаты поиска

Содержание System 2316E

Отзывы:

Похожие инструкции для System 2316E

Бренды по названию

Популярные бренды