12
Auxillary
Outputs
Auxillary Outputs
Remote Start Switch 1
Immediately
Remote Start Switch 1 Hold
AUX Relay 1 Duration Regeneration
AUX Relay 2 Water Polish
Salt
Efficiency
Settings
The following actions will change the system
parameters, enter the confirmation needed
for set up.
Please Enter Password:
Salt Efficiency
Salt Efficiency Settings
High
Efficiency
6
Lbs/CF
3650
Grains
Standard
Efficiency
10
Lbs/CF
2800
Grains
High
Capacity
15
Lbs/CF
2000
Grains
Minimum
Residual
15
%
3
%
Minimum
Residual/UNIT
PROGRAMMING
(CONTINUED)
Press the UP / DOWN button to highlight the desired menu icon. Press the SET button to enter the Auxiliary Outputs menu. For detailed program-
ming instructions please see the Advanced Programming section.
Press the UP / DOWN button to highlight the desired menu icon. Press the SET button to enter the Salt Efficiency Settings Menu. A password is
required to un-lock this screen to prevent non-qualified persons from making changes. The password is 1, 2, 3, 4
These settings are Factory Set.
Minimum Residual setting controls at what minimum system reserve capacity percentage a regeneration will be scheduled to increase capacity of
the entire system. This setting is Factory Set.
Minimum Residual / Unit setting controls at what minimum reserve capacity percentage each individual tank a regeneration will be scheduled. It is
factory set at 3% to allow for variation in capacity due to flow rates and fluctuating hardness.
