Pg.
#8
ELECTRICAL HOOK UP (Continued)
- Hang fan on mounting bracket by holding
motor so that inside of motor is pointing
down, insert “T” slot style end of motor
bracket into rectangular cut out in mounting
bracket.
NOTE:
Remove screw and lock
washer from “T” slot end of motor bracket
before hanging.
- Hang motor from mounting bracket
using temporary hanging hook.
CONNECTING THE (GREEN) GROUND WIRE
- Connect ground wire from outlet box to
green wire on the motor using a
(not supplied).
Temporary
Hanging Hook
Motor
Green Ground Wire
Style #1
Style #2
Mounting Bracket
“T” Slot Style End of
Motor Bracket
Pg.
#5
MOUNT BLADE BRACKETS TO BLADES
Hex Nut
Blade Bracket
Blade Bracket Screw
Fibre Washer
Flat Washer
Blade Bracket
Screw
Blade Bracket
Fibre Washer
Flat Washer
Cast Blade Brackets
- Place blade bracket screw through flat
washer, fibre washer and blade.
- Align with corresponding hole in
blade bracket.
- Repeat with (2) remaining screws
and tighten.
Stamped Blade Brackets
- Place blade bracket screw through hole
in blade bracket.
- Align with corresponding hole in blade bracket.
- Place fibre washer and flat washer over blade
bracket screw and secure with hex nut.
- Repeat with (2) remaining screws and tighten.
INSTALL DECORATIVE MOTOR HOUSING
- Remove 4 screws and washers from sides of mounting bracket.
- Position decorative motor housing so that the holes in housing align with
holes in mounting bracket.
- Tighten decorative motor housing using the 4 screws and washers
previously removed.
Screws
DecorativeMotor Housing
Washers
2.
4.
5.
A
Hex Nut
Blade Bracket
Blade Bracket Screw
Fibre Washer
Flat Washer
Lock Washer
Fig. 5
Fig. 6a
Fig. 6b
Fig. 3a
Fig. 3b
Fig. 3c
Marette
marette.
- Take out hardware package.
- Take out hardware package.
