CAN SL Series, Инструкция по установке, использованию и обслуживанию

Страница: 114 / 362

42
ENGLISHENGLISH
OUTSIDE REMOVABLE GAS HOB UNITS
▪
SL series
INSTALLATION METHOD - VERSION F
Installation on telescopic legs requires that the product be used only if connected to a
transportable gas cylinder, fitted with an appropriate regulator and suitable connections, as
specified in technical standard EN 484.
The product can also be used without the supplied legs only if resting on the rubber feet
incorporated in the corner elements, and placed on fireproof, perfectly horizontal surfaces.
SAFETY DISTANCES FOR FREE INSTALLATION ON TELESCOPIC LEGS
Installation on telescopic legs is always allowed outdoors and in well-ventilated areas as long as the minimum
safety distances from combustible substances and materials, tanks and vents containing flammable/
explosive substances, and any other surface or material that due to overheating may deteriorate and cause
a fire, are complied with.
Once the appliance has been installed on the supplied telescopic legs, properly adjust them according to
the expected height of use (max H from the floor 800 mm). Make sure the appliance is well positioned on
the floor and the cooking pan support is almost horizontal.
During use, the appliance must be kept at a certain safety distance from any horizontal/vertical panelling,
awnings, fuel tanks/vents and/or any flammable or explosive substance.
To identify the minimum safety distances, refer to the following table and the charts shown below.
dimensions and minimum safety distances for free installation on telescopic legs
model d
min [m]
h
min
[m]
SL1323LC-F
3.00 1.25
SL1323LL-F 3.00 1.25
SL1336LC-F 3.00 1.25
SL1336LL-F
3.00 1.25
SL1350LC-F 3.00 1.25
SL1350LL-F 3.00 1.25
SL1400LC-F
3.00 1.25
SL1400LL-F 3.00 1.25
SL1410LC-F 3.00 1.25
SL1410LL-F
3.00 1.25
Min D =
Minimum distance from tanks/vents/unions/ recesses containing flammable and/or explosive substances
Min H = Minimum vertical distance from flammable canopies/curtains awnings
Min D > 3.0 m
Min H > 1.25 m
Min H > 1.25 m
Min D > 3.0 m
VERSION LC-F
VERSION LL-F