Camus Hydronics DFH1100, Инструкция по установке, эксплуатации и обслуживанию

Страница: 42 / 70

37
6.11 MODE 6 & 7: EXTERNAL TARGET TEMPERATURE INPUT OPERATION: VIEW DISPLAY
From the Home display;
1) Press [ITEM] to view the following parameters:
Display
Parameter
Name
Parameter Description Parameter Range
Boiler Target
Temperature
To provide a target setpoint for
the heating system. Setpoint is
controlled to the inlet sensor.
---, 35 to 266
o
F
(---, 2 to 130
o
C)
System
Temperature
Real-time System Temperature
NOTE: This parameter is only
available in Mode 7
14 to 266
o
F
(-10 to 130
o
C)
Boiler Outlet
Temperature Real-time Outlet Temperature to
Boiler 14 to 266
o
F
(-10 to 130
o
C)
Boiler Inlet
Temperature Real-time Inlet Temperature to
Boiler 14 to 266
o
F
(-10 to 130
o
C)
Boiler Delta
T
Real-time temperature difference
between the outlet sensor and
the inlet sensor.
-99 to 252
o
F
(-72 to 122
o
C)
Modulation
Real-time modulating output
percentage
0 to 100%
Total Run
Time Since
Installation
Monitors the amount of
operational time since the
MicoFlame was installed. The
first two digits are the number of
thousands of hours and the three
digit display shows the number of
hundreds of hours.
Press
simultaneously to
reset the counter
Alternates between
00 and 999