CPS-EX2000(R2) MANUAL
Camtec Power Supplies GmbH - Gewerbestrasse 30 - DE-76327 Pfinztal / Germany
P.19/21 (07/2017.01.3)
Tel. +49 (721) 46596 - 0 Fax +49 (721) 46596 - 77
www.camtec-gmbh.com
-
(Subject to alterations. This product is not designed to be used in applications such as life support systems wherein a failure or malfunction could result in injury or death)
Wall Mount Option & 3D Heat Dissipation (3D-HD)
Our aligned and controlled heat dissipation design opens possibilities that are formerly being reserved to
custom design power supplies: Steplessly hard mount of the CPS-EX2000/3000 power supply modules in a 3D-
room.
In practice that means that one can mount the modules into every angle imaginable. Our
3D
H
eat
D
issipation
(
3D-HD
) ensures optimal cooling in each mounting position you may consider.
All you may consider is to make sure, that at least a distance of 5cm (2 Inch) to the front cooling slots and 15cm
(6 Inch) to the rear cooling openings are guaranteed to prevent from blocking the airflow. The cabling must also
not block the heat dissipation.
When the CPS-EX2000/3000 is hard mounted the optional front plates cannot be used. The standard control
LEDs allow visualization from any mounting position (see below drawing).
