FI
GB
MALFUNCTION MANAGEMENT
If the symbol “-E” o “E-” flashes on the display, the refrigerator
will continue to operate normally for a few days but you should
contact the Technical Assistance Centre as soon as possible.
DOOR OPEN ALARM
Every time the door is opened the symbol is illuminated in
white, in a fixed manner. If the door has been open for over 2
minutes, the “DOOR OPEN” alarm is activated; it may be disabled
in one of the 2 following ways:
-
if the door is closed, the audible and visible alarms are
deactivated;
-
if the symbol is touched, the audible alarm is deactivated
but the illuminated white visible alarm signal will flash instead
of being a fixed light.
FREEZER TEMPERATURE ALARM
The alarm function was designed with the aim of warning the
user that, due to some external cause (for example, a power
cut, the door has been left open, etc.) the food kept in the freezer
compartment has reached a temperature higher than +1
°
C and
has therefore completely thawed out.
In this case, the freezer temperature alarm mode is enabled
and flashes on the display, along with the highest temperature
detected inside the compartment; the ALARM text is illuminated
in red and the audible alarm is also activated.
The display memory (maximum temperature reached) is important
because, if power is cut off and then restored, the appliance will
continue operating as normal; this could result in food which had
previously thawed out being refrozen.
PRE-ALARM MODE AND FREEZER TEMPERATURE
PRE-ALARM INDICATION
The pre-alarm mode is activated when the temperature inside
the freezer compartment reaches a value higher than -12
°
C (for
example, -11
°
C). This may occur in the following situations:
-
a large amount of unfrozen food has been placed in the
freezer (see freezing modes);
-
the door has been open for an extended period of time;
-
the electricity supply has been cut off for a prolonged period
of time;
-
the appliance has malfunctioned.
The pre-alarm mode is indicated by the temperature appearing
intermittently on the freezer display, by the flashing white ALARM
symbol and by the audible alarm. The audible alarm may be
disabled by touching the ALARM text; in this case the pre-alarm
mode indicator of the flashing temperature on the display remains
active and the ALARM text will remain lit in a fixed manner
instead of flashing. The pre-alarm mode is disabled automatically,
but only when the temperature of the freezer compartment falls
below -12
°
C; at this point the ALARM text will no longer be
illuminated, while the temperature will stop flashing and remain
lit in a fixed manner on the display.
16
STARTING THE APPLIANCE - TOUCH-DISPLAY
Содержание FRZ500IT
Страница 1: ...frz500IT INSTRUCTION MANUAL WWW CAMPOMATIC COM Made in Italy ...
Страница 27: ...15 ...