Assembly Instructions
1. Assembly the Gas Support Stand (11).
Using the Screw (E) to lock the two Gas Support
Stand (11) at the Metal Stand (10).
3. Wheel installation.
Slide the Axle (12) through the holes located at the
bottom left, and then install the Wheels (13) at both
sides of the Axle (12). Lock them with R-Pin (D),
and then separately slide in the Wheel Lid (14).
Note: When installing the wheel
（
13
）
, if the R pin
(
D
)
cannot be installed, please change the front and
back of the wheel.
2. Assembly the Bottom Leg Unit.
Using M5 screw (A) to connect and lock the Metal
Stand (10) with the Left Bottom Leg Unit
（
Short
）
(8) and Right Bottom Leg Unit(Long) (3).
Parts Board
A. Flange Screw M5x8, 16PCS
B. Flange screw M4x10, 12PCS
E. Screw M4x10x4
F. Strap x1
Screw Bag
C. Flange screw M6x50, 8PCS
D. R-Pin, 2PCS
E: Screw M4x10, 4PCS
A: Flange screw M5x8, 8PCS
11
10
14
12
13
8
3
10
6
www.camplux.com
Visit Us: Camplux.com
3330-A Marathon Ct Charleston, SC 29418
1(844) 538-7475
