Troubleshooting
Leak in the gas system
Replace the gas cylinder
Gas cylinder is empty
Cylinder valve is closed
Pre-heating was too short
Gas outlets on the burner are
blocked
The nozzle on the adjusting
element (behind front panel) is
not inserted into the burner hose
Fatty foods
Flashback caused by blockages
in the burner
Other gas system blocked
Problem
Possible Cause
Solution
There is a smell
of gas
Close the cylinder valve immediatel.
Prevent any flame or spark formation (do not
switch on any electrical appliances).
Tighten all connections on the gas system.
Check all components of the gas system for
visible damage replace defective parts with
original spare parts.
Check for leaks using a leak detector
Burner does not
ignite
Temperature on
grill griddle too
low
Popping or
bubbling noise
Strong flare-up
Open cylinder valve
Visual inspection, if necessary adjust
nozzle and connection hose
Close the cylinder valve immedi-ately.
Wait five minutes and then switch the
barbecue back on.
If the malfunction reoccurs, disassemble and
clean the burner
The gas system should be cleaned by
a specialist
Close the lid and set the flame regulator to
max
Remove blockage from burner
Remove any large areas of fat prior to
barbecuing or place the meat on a grill griddle
plate or reduce the barbecue temperature
If the above solutions do not solve your problem, or you need to replace the accessories, please use the phone or
email on the cover to contact us.
14
www.camplux.com
Visit Us: Camplux.com
3330-A Marathon Ct Charleston, SC 29418
1(844) 538-7475
