Campbell UT6, Руководство по эксплуатации продукта, Страница: 27 / 32

Table 7-2: Bracket requirements
Mast/crossarm/
tower diameter
Example mast/
crossarm/tower
Brackets needed
Small bracket
orientation
2.5 cm (1 in)
UT10/20/30 tower leg
(excludes bottom
section of UT20/30)
(1) small bracket
(1) medium bracket
Angled toward
mast/tripod
3.2 cm (1.25 in) or
3.3 cm (1.31 in)
UT20/30 tower mast,
UT20/30 tower leg
(bottom section only)
(1) small bracket
(1) medium bracket
Angled away from
mast/tripod
4.8 cm (1.9 in)
CM110/106B tripod
mast, UT10 tower mast
(2) large bracket N/A
7.2.3 CM230, CM230XL adjustable angle mounting kits
The CM230 and CM230XL adjustable angle mounting kits ( FIGURE 7-16 (p. 25)) allow the user to
attach an antenna or sensor and change its mounting angle from horizontal to vertical. This
allows the component being mounted to be aimed at a specific location. The CM230 is used
when mounting the component close to the mast or tower while the CM230XL extends the
component away from the mast or tower.
FIGURE 7-16. CM230 and CM230XL adjustable angle mounting kits
The CM230 and CM230XL will accept antennas and sensors with an outer diameter of 2.54 cm to
3.81 cm (1.0 in to 1.5 in). The bracket can be attached to a mast or pipe with an outer diameter of
3.30 cm to 5.33 cm (1.3 in to 2.1 in). The declination of the antenna or sensor is fixed when the U-
UT6 and UT10 Universal Towers 25