Campbell UT6, Руководство по эксплуатации продукта, Страница: 15 / 32

7.1.2 Tower installation
1. Install the mast as shown in FIGURE 7-5 (p. 13). Attach the 3/4-inch x 10-inch nipple to the
mast using the bell reducer. Loosen the two mast mounting bolts at the top of the tower
and insert the mast. For the UT6 at a 1.8 m mounting height, or the UT10 at 3 m, rest the
bell reducer against the top of the tower. Tighten the two bolts to secure the mast.
FIGURE 7-5. Install the mast
2. Remove the three 5/16-inch bolts, nuts, and fender washers from the tower mounting brace
( FIGURE 7-6 (p. 14)).
UT6 and UT10 Universal Towers 13