Campbell T107, Руководство по эксплуатации продукта

Страница: 53 / 102

FIGURE 6-30. Slide antenna bracket U-bolt around back of the pole
b. Put a flat washer, lock washer, and a silicon bronze nut, in that order, on the ends of
the U-bolt ( FIGURE 6-31 (p. 46)).
c. Tighten the nuts finger tight to allow the angle bracket to rotate around the pole.
FIGURE 6-31. Antenna bracket mounted to pole
7. Mount the saddle bracket to the adjustable angle mount bracket by inserting the ends of
the bracket through the quarter circle notches ( FIGURE 6-32 (p. 47)).
8. Put a flat washer, lock washer, and a silicon bronze nut, in that order, on the ends of the
saddle bracket. Do NOT tighten down the nuts at this time.
Section 6. Installation 46