Campbell T107, Руководство по эксплуатации продукта

Страница: 93 / 102

FIGURE C-4. Strut clamps in brackets
3. Place the bottom strut clamp and bracket approximately 3 m (1 ft) below the top clamp.
This clamp is installed with the hook side down. The bracket might have to be moved a
little to accept the enclosure bracketing, so don’t tighten the bracket yet.
FIGURE C-5 (p.
86) shows the top and bottom brackets correctly positioned on the T107 pole.
FIGURE C-5. Both strut clamps and brackets on T107 pole
4. Hook the enclosure on the top bracket as shown in FIGURE C-6 (p. 87).
Appendix C. PS24 24 Ah power supply with 10 x 12 inch enclosure 86