SC-USB USB to CS I/O Opto-isolated Interface
3
•
PC software compatibility
PC200W
,
PC400
,
LoggerNet
,
RTDAQ
and most
other packages that support virtual serial ports.
•
Active current consumption less than 19 mA (current drawn from
datalogger).
•
Quiscent current consumption less than 80 µA (current drawn from
datalogger).
2.3 General Specifications
•
Height: 0.8 in (2 cm)
Width: 1.6 in (4 cm)
Length: 3.0 in (7.5 cm)
•
Weight: 3.0 oz
•
Operating temperature range -25° to +50°C
•
EMC compliance: complies with EN61326:1998 (see Section
(p. 18)
)
•
Driver support for Windows 2000 / Windows XP / Windows Vista /
Windows 7 / Windows 8 / Windows 10 supplied on CD (Contact
Campbell Scientific for other drivers)
2.4 Ships With
•
17648 USB cable for connection to the PC’s USB port.
•
SC12 CS I/O cable for connection to the datalogger.
•
Driver CD containing setup utility and manual.
•
ResourceDVD.
3. Installation
3.1 Driver Installation
The installation procedure is straightforward. Whenever possible you should
install the drivers for the SC-USB on the PC before plugging in the SC-USB
for the first time. The drivers need to be installed from the CD provided with
the product or using the package downloaded from the internet.
If using a CD, the setup program should start to run when the CD is first
inserted into the machine, if allowed by the security settings of the PC. If this
does not happen, browse to the CD and run the autorun.exe program in the root
directory of the CD.
