Campbell CS725, Инструкция по эксплуатации

Страница: 40 / 56

CS725 Snow Water Equivalent Sensor
A-5
[99] Accept selection
To Modify: [parameter number, space, new value,CR]
After the last day or end date is accepted the Histograms will be reported in
the following format. For each day requested the date is placed first followed
by the 1024 bin values.
22/09/2009 23:59:50
Time stamp of first requested day
29
This line represents the counts for BIN#1
52
This line represents the counts for BIN#2
7
This line represents the counts for BIN#1024
23/09/2009 23:59:50
Time stamp of second requested day
359
This line represents the counts for BIN#1 for the second day
.
No more histogram data available in this time window
11. [.f]
Display measurements according to selected dates
Four lines will be output for every day requested where monitoring
occurred. See the section under [.fl] for output details.
The date selection procedure is the same as the [.hd] command.
12. [.fl]
Display only the readings of the current day which can be up to 4 detailed
measurement results as follows:
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |10 |11 |12|13|14|15|16 |17 |18 |19
01/10/2014 23:59: 1 2 52913 11342 5716 393 343 411 18 18 64 0 9 24 24 13 4.2 12.98
01/10/2014 05:59: 1 2 57037 13168 6074 371 309 392 18 18 77 1 7 19 24 13 4.2 12.23
01/10/2014 11:59: 1 2 69645 13016 6415 371 360 375 18 18 27 1 2 8 24 12 3.2 12.23
01/10/2014 17:59: 1 2 58951 14218 6280 359 292 382 18 18 83 0 1 16 24 13 3.2 12.23
The format is the date and time stamp followed by the following numbers:
1. Date
2. Time Stamp
3. Station ID (up to 8 alphanumeric characters)
4. CS725 Serial number
5. K counts total (uncorrected)