![background image](http://html1.mh-extra.com/html/campbell/cs451/cs451_product-manual_3793103014.webp)
CS451/CS456 Submersible Pressure Transducer
2
4. QuickStart
A video that describes data logger programming using
Short Cut
is available
/videos/cr1000x-datalogger-getting-started-program-
Short Cut
is an easy way to program your data logger to measure the
sensor and assign data logger wiring terminals.
Short Cut
is available as a
download on
. It is included in installations of
LoggerNet
,
PC200W
,
PC400
, or
RTDAQ
.
The following procedure also describes programming with
Short Cut
.
1. Open
Short Cut
and click
Create New Program
.
2. Double-click the data logger model.
3. In the
Available Sensors and Devices
box, type CS451 (1). You can also
locate the sensor in the
Sensors | Water | Level & Flow
folder. Double-
click
CS450/CS451/CS455/CS456 Pressure Transducer
(2). Water level
defaults to feet and temperature defaults to degrees Celsius. These can be
changed by clicking the
Water Level
(3) or
Temperature
(4) box and
selecting a different option. Type the correct
SDI-12 Address
(5) for the
CS451. After entering the
Properties
, click on the
Wiring
(6) tab to see
how the sensor is to be wired to the data logger.