Campbell CR5000, Руководство оператора

Страница: 227 / 238

Section 9. Program Control Instructions
9-21
Parameter
& Data Type Enter
TimNo
Constant,
Variable, or
Expression An integer number for the timer (e.g., 0, 1, 2, . . .) Use low numbers to
conserve memory; using TimNo 100 will allocate space for 100 timers even
if it is the only timer in the program.
Units The units in which to return the timer value.
Constant Alpha
Code Numeric
Code
Units
USEC 0 microseconds
MSEC 1 milliseconds
SEC 2 seconds
MIN 3 minutes
TimOpt
Constant The action on the timer. The timer function returns the value of the timer
after the action is performed
Code
Result
0 start
1 stop
2 reset and start
3 stop and reset
4 read only
Timer Example
The example uses Timer.
While…Wend
The While…Wend instructions are used to executes a series of statements in a
loop as long as a given condition is true.
Syntax
While Condition
[StatementBlock]
Wend
Remarks
While…Wend loops can be nested.
The While...Wend statement has the following parameters:
While The While statement begins the While...Wend loop control
structure.
Condition The Condition is any expression that can be evaluated True
(nonzero) or False (0 and Null). If Condition is true, all
statements in StatementBlock are executed until the Wend
statement is encountered. Control then returns to the While
statement and Condition is again checked. If Condition is
still true, the process is repeated. If Condition it is not True,
execution resumes with the statement following the Wend
statement.