Campbell CR300 series, Руководство оператора

Страница: 15 / 86

CR300-Series Datalogger
5
The CR300 does not use a security
code or a PakBus encryption key by
default, so the Security Code can be
set to 0 and the PakBus Encryption
Key can be left blank. If either
setting has been changed, enter the
new code or key. Security can be set
through
Device Configuration
Utility , Connect Screen
Settings
Editor , or the SetSecurity()
CRBasic instruction.
Click Next .
Review the software settings in the
Setup Summary .
Click Next .
With the USB cable connected, test
the communication settings by
selecting Yes . Click Next to initiate
the test. To troubleshoot an
unsuccessful test, see Section 9 ,
Troubleshooting
(p. 52)
. Click Next
again after a successful test.
The Datalogger Clock window
shows the current time for both the
CR300 and the PC. Set the
datalogger clock to the Adjusted
Server Date/Time by clicking Set
Datalogger Clock . Apply time
offsets in Time Zone Offset .
Click Next .