CR300-Series Datalogger
14
4.4 Wire Sensors and Devices
If the program was created in
Short Cut
, follow the wiring diagram created by
Short Cut
to attach sensors and devices to the datalogger. The wiring must
match the diagram exactly for the sensors to be measured correctly.
If the program was created directly in the
CRBasic Editor
, attach sensors and
devices according to the options chosen for the measurement instructions and
according to their individual product manuals.
To open a terminal on the CR300, use the included flat-blade screwdriver. This
is shown in FIGURE
FIGURE 4-1. Opening a Terminal
4.5 Send a Program
Watch the video for Sections 4.5 – 4.7:
Connect to the datalogger as shown
(p. 7)
.
The
Current Program
section
shows the program currently
running on the CR300. Click
Send
New
or
Send Program…
to send a
new program to the datalogger.
Select the program to send, and
click
Open
.
Send the program created in Section
. Browse to the
C:\Campbellsci\SCWin
folder.
Select
MyTemperature.CR300
file. Click
Open
.
Содержание CR300 series
