CR300-Series Datalogger
4
After the driver has been installed, connect the CR300
USB
port to the PC with the included USB cable (pn
27555). The connection supplies 5 V power over USB as well as a communication link.
NOTE
The Power LED indicates the program and power state of the CR300. Because the
CR300 ships with a program set to run on power-up, the Power LED will quickly flash
3 times every 10 seconds when powered over USB. See TABLE
(p. 40)
, for other flash patterns.
With the CR300 connected to the
PC, a port titled
CR300
will appear
in the
COM Port
list. Select the
CR300
COM Port. The number of
your COM port may differ.
Click
Next
.
Enter the
Baud Rate
and
PakBus
Address
. These must match the
hardware settings of your CR300.
The default baud rate of a CR300
datalogger is
115200
, and the
default PakBus Address is
1
.
Click
Next
.
Select the
COM Port
labeled
CR300
. Keep all other defaults.
Keep all default
Datalogger Settings
.
Содержание CR300 series
