Campbell CompactFlash CFM100, Инструкция по эксплуатации

Страница: 21 / 33

Section 4. Data Retrieval
4.2.2 Reinserting the Card
If the same card is inserted again into the CFM100, the datalogger will store all
data to the card that has been generated since the card was removed that is still
in the CPU memory. If the data tables have been left on the card, new data
will be appended to the end of the old files. If the data tables have been
deleted, new ones will be generated.
Check the status of the card before leaving the datalogger. If a
CF card was not properly accepted, the CFM100 will flash
orange. In that case, the user needs to reformat and erase all data
contained on the CF card. Formatting or erasing a CF card
might be done on a PC or datalogger. The procedure for
formatting a CF card is explained in Section OV5 of the CR1000
and CR3000 manuals. NOTE
4.2.3 Card Swapping
When transporting a CF card to a computer to retrieve data, most users will
want to use a second card to ensure that no data is lost. For this method of
collection, use the following steps.
1. Insert formatted card (“CF-A”) in CFM100 attached to datalogger.
2. Send Program containing CardOut instruction(s).
4-2