Campbell CompactFlash CFM100, Инструкция по эксплуатации

Страница: 7 / 33

Section 1. CFM100 CompactFlash
®
Module Overview
ST
ATUS
CARD
CONTROL
MADE IN USA
Logan, Utah
CFM100 CompactFlash Memory Module
SN:
12057
FIGURE 1-1. CompactFlash Module
1.2 Physical Description
The CFM100 connects to a datalogger peripheral port and has a slot for a Type
I or Type II CompactFlash (CF) card (3.3V, 75 mA).
There is one red-green-orange LED (light emitting diode) and two buttons:
control and eject. The LED indicates the status of the module. The LED will
flash red when the CF card is being accessed, solid green when it is OK to
remove the card, solid orange to indicate an error, and flashing orange if the
card has been removed and has been out long enough that CPU memory has
wrapped and data is being overwritten without being stored to the card. The
control button must be pressed before removing a card to allow the datalogger
to store any buffered data to the card and then power it off.
1-2