3
GETTING TO KNOW YOUR UNIT
Air Inlet
Exhaust Port
Air Regulator Adjustment Screw
Trigger Latch
Trigger
Cap Screw
Cutting
Disc/Wheel
Arbor
Guard
14 mm (Arbor) wrench
5 mm Allen wrench
SET UP INSTRUCTIONS
Plug
Quick
Coupler
Air Hose
* Items shown in Set Up Instructions are not included with this tool.
BEST PRACTICES
u
The air compressor used with your cut-off must be able to maintain a minimum of
90 PSI when the tool is being used. An inadequate air supply can cause a loss of
power and inconsistent tool output/performance.
u
A pressure regulator—used at the tool—is helpful to control the operating
pressure of the tool and maintain 90 PSI.
u
Use an oiler to provide oil circulation through the tool and a filter to remove liquid
and solid impurities which can rust or “gum up” internal parts of the tool.
u
To disconnect a coupler/plug from a system set-up: push the coupler and plug
together before pulling the coupler sleeve back and separating the coupler and
plug.