![background image](http://html.mh-extra.com/html/campagnola/buonolio-top/buonolio-top_use-and-maintenance-manual_488402020.webp)
19 - 72
1 - INTRODUCTION
1.5 Warranty
•
The tools and machines manufactured by CAMPAGNOLA S.r.l. are guaranteed for 1 or 2 years, depending on the kind of
product, starting from their purchase date indicated in the invoice or in any other document with legal value.
•
The warranty is to be considered valid only if the installation and use of the machine and/or tools have been carried out
according to the instructions indicated in the Use and Maintenance Manual or to instructions written by the Authorized
Service Point personnel.
•
Originally faulty parts will be repaired or replaced free of charge.
•
The purchaser shall pay for the labour and transport costs.
•
The warranty does not cover parts subject to wear and relative shipping costs.
•
The eventual costs of intervention performed by the Campagnola S.r.l. personnel (inspections, disassembling and assem-
bling operations), caused by wrong working which was not due to manufacture faults, are not included in the warranty.
•
Replacements or repairs of faulty equipment, when warranty is claimed by the users, can only be authorized by accredited
Service Points personnel and their decision is final.
•
The machine is guaranteed to be free from defective materials and workmanship. This warranty does not cover any personal injury
or property damage caused by misuse, careless or unsafe handling, inadequate maintenance or repairs of the oil mill.
•
The warranty is lost in case of tampering and /or even small changes and in case of use of non-original spare parts.
•
The warranty does not cover replacement of the oil mill and/or its equipment.
WARNING!
For warranty claims, according to the above mentioned points, it is necessary to enclose the properly filled-in warranty
card and the corresponding purchase proof with date of purchase (invoice or any other document with legal value).
2
- SAFETY PRECAUTIONS
2.1 Precautions
WARNING!
CAMPAGNOLA S.r.l. declines all responsibilities if the precautions below are not taken.
2.1.1 Results of the tests made by law
WARNING!
Risks due to the operator’s contact with the noise and vibrations of the machine.
1)
NOISE LEVEL
Continuous A-weighted sound pressure level measured at operator’s ear in compliance with standard UNI EN ISO
11202:
LpA
= 82 dBA
Sound power level measured in compliance with standard UNI EN ISO 3744:
LwA when empty = 98 dBA
LwA with load = 100 dBA
2)
EMC TEST
Complies to Directive 89/336/EEC and standard CEI EN 55011
3)
VIBRATIONS LEVEL
The risks caused by vibrations transmitted to the hand- arm are irrelevant in this type of machine.