- 5 -
Only use a power adaptor (not supplied) with the mains voltage
specified on the rating plate (5V). Otherwise danger of fire or
electrocution.
Disconnect the power by pulling the power adaptor out of the socket.
A plugged-in power adaptor (not supplied) can continue to use power
and therefore represents a hazard source.
The power supply may not be used during thunderstorms. Otherwise
danger of electrocution.
Damage from heat-fire hazard
Do not leave the camera in places that are susceptible to considerable
increases in temperature (e.g. a vehicle). The housing and internal
parts may be damaged, which in turn could cause a fire.
Do not wrap up the camera or place it on textiles. This could produce a
build-up of heat in the camera that can cause deformation of the
housing and may represent a fire hazard.
Injuries and material damage
Only place the camera on sturdy surfaces. The camera could otherwise
fall or topple over, causing damage or injury.
Do not operate the camera whilst running or driving. You could fall or
cause a traffic accident.
Only use a mains adaptor (not supplied) for the camera, having the
input voltage specified on the rating plate (5V). We do not accept any
liability for damage caused by the use of an incorrect mains adaptor.
The 230V socket used for the mains adaptor (not supplied) must not
be covered and accessible at all times so that the mains adaptor can
be quickly disconnected from the mains when required.
Ensure adequate ventilation and do not cover the mains adaptor (not
supplied) to avoid overheating.
Содержание EZ-Solar
Страница 1: ...Digital Wildlife Camera EZ Solar...
Страница 36: ...35...