- 15 -
SETUP
mode: Mode switch at SETUP position
(LCD screen is on).
5.2 Operating buttons
In the SETUP mode, you can check and change the settings of the Trail
Camera with the help of its built-in LCD. These settings, found in the
SETUP Menu, let you change the photo or video resolution, the interval
between photos, switch the time imprint on, etc. Moving the power switch
to the SETUP position will turn on the LCD display, and you will see an
information screen that shows how many images have been taken, the
battery level, camera or video mode, etc.
Note:
─
Always move the power switch from OFF to SETUP mode. It is
possible that the camera could lock up if it is switched from ON to
SETUP mode. If this occurs, simply move the switch to OFF and then
push it up to SETUP again.
Содержание EZ-Solar
Страница 1: ...Digital Wildlife Camera EZ Solar...
Страница 36: ...35...